References

Click here to find a list of all references

 

It is necessary to highlight the professionalism and experience of the trainer that can only come from real practice. And thanks to this, I have to highly evaluate all the training organized for our company because they did not bring to our employees only the theoretical phrases described in the book but explanations from practical examples that allowed a faster and clearer understanding of the issue. Some training for RealTime Technologies is done directly in our production, and IPC classification issues are addressed to real-time problems in real time, giving our operators much more effective feedback on their IPC standards, and the tutor instructs operators to identify the cause of the error with help acquired knowledge of IPC standards. Satisfaction with the use of RealTime Technologies is great and we look forward to more co-operation

Rastislav Ondrejka
Engineering Manager
CCS Slovakia, s.r.o., Hlohovec - Šulekovo

The trainings that we attended in Realtime Technologies s.r.o. have been highly rated by our employees and increased their expertise, which will logically show the quality of our products. Our staff appreciated the open access of the trainer and the willingness to discuss all the problems encountered in the production of electronic products. Each of them was highly rated to have received no general explanation of the requirements of the IPC-A-610 standard but also, by way of examples, to explain the possible causes of errors occurring in the technological process. This training leads from a traditionally dry repetition of the requirements of the standard to a lively discussion with interest in understanding the requirements and their way of accomplishing not only during the training but also in their subsequent application in daily practice. This is what our company needs and appreciates our customers.

Dalibor Oleš
General Manager of Quality Control and Assurance
Panasonic Electronic Devices Slovakia s.r.o., Trstená

Training has expanded our knowledge of the SMT process, bringing us a greater insight into the electrotechnical production from the point of view of product quality. We are pleased to have received IPC-A-610-E training. The course of the training was at an excellent professional level, the theoretical part as well as a large number of practical samples. The technical knowledge of the lecturer and the lectures were perfect and we also recommend training in Realtime Technologies and others.

Vlastimil Bukovec
New Model Intro Engineer, Mount & Production Division
FOXCONN Slovakia, s.r.o., Nitra

Training in Bratislava took place in a very pleasant atmosphere with a pleasant team, the supervisor was well prepared and able to answer all our questions. Overall, IPC training has provided us with information on the basis of which we have been able to improve the quality of our products and we have also been able to provide quality training for our manufacturing staff. We have already ordered another training for IPC 7711/21. We look forward to further cooperation.

Peter Kaukič
Quality Engineer Production, Automotive Experience
Adient Slovakia, s.r.o. 

The trainer's expertise is very good, he has good practical and theoretical knowledge he used to train IPC 7711/7721 in our company Enics Slovakia s.r.o. and he was able to engage all those involved in the training. The presentation of the IPC standards themselves and their excerpts have been continuously supplemented by practical demonstrations or by the video itself. The training was mainly focused and conducted in a practical area, and training and guidance staff were trained to choose the most appropriate system for a specific PCBA fix, which would bring much greater added value than just the theory itself. In the case of re-training (IPC-A-610 or 7711/7721), we strongly recommend that you provide the training provided by RealTime Technologies s.r.o.

Ivan Bosák
Qualiy Manager & Management Representative
ENICS Slovakia, s.r.o., Nová Dubnica

Based on our previous successful collaboration with our IPC A 610 certification, we contacted Realtime Technologies SK, s.r.o. with the preparation of a highly specialized educational activity that focuses on the theoretical and practical applications of the IPC 7711/21 international standard. Based on preparatory discussions, we organized two seminars related to training totaling 48 hours (two times three days). Both of these activities were prepared at a high level with targeted programs, carefully prepared learning aids, and customized content to the specific conditions of our processes. The lecturer has demonstrated a high level of technical and lecturing knowledge and skills in line with the needs of our company. A great benefit was the high flexibility and proactive attitude of the lecturer during the two seminars. The participants in the educational activity, as well as their superiors, expressed their satisfaction and appreciated the contribution of the whole training to their everyday work. Overall, we value service delivery, IPC 7711/21 training as a professional, and if we need further training needs of this nature, we would again like to reap the services of Realtime Technologies SK, s.r.o.

Mgr. Miloš Bánovský
European Repair Center Manager
Delta Electronics (Slovakia), s.r.o.

I thank trainers for an excellently organized and highly specialized training for IPC A-610 E, including a number of illustrative demonstrations and answers to any expert questions. This training has expanded and enriched my knowledge of further professional experience in the SMT and THT process, its settings and qualitative evaluation. At the same time, I gained new insights on PCB varnishing and error detection in / after painting. Due to the high professionalism of trainers we recommend training in Realtime Technologies and others.

Ing. Vladimír Sabol
Head of Department of Technical Preparation
ELCOM, limited liability company, Prešov

I very much appreciate the opportunity to attend the IPC A610F training (May 2016) in Realtime Technilogies s.r.o. . Mr. Dostál has given his reputation as a precursor. I very much appreciate the open access of the supervisor and the opportunity to deal with the discussed topic both in general and in detail, including open discussions on the new chapter of the F-Revision and the topic of the differences between the E and F. revisions
The form of training, the technical knowledge of the lecturer and many councils from a more experienced colleague were clearly above-standard. I believe that I will apply the newly acquired knowledge also in our company, contributing not only to increasing the qualifications of our employees but also to improving the quality of our products.

Ing. David Pasler
DPS Quality Specialist, CIT; 3V-Q
ROHDE & SCHWARZ plant Vimperk s.r.o., VIMPERK

I would like to thank you once again for training from IPC A 610E, 7711/21, which you have trained in our company 28 - 30.1.2013. Both the content and the form of the training were both filling and performing. In addition to training and revival of knowledge previously acquired through IPC-Specialist Certified Training, we have learned and, in practice, tried out new, expanded specifications in the field of repairs and replacement of both conventional wiring components and SMD components and PCB repairs.
Thanks to you, we will expand the types and types of scrubbing and cleaning spikes and change the technology of replacing QFP and QFJ components. We enjoyed our training very much and I hope that our cooperation will be equally beneficial in the future.

Andrea Milotová Ing.
supervisor of 3VPA
ROHDE & SCHWARZ plant Vimperk s.r.o., VIMPERK

I would like to thank you for training the IPC-A-610 standard in OEZ s.r.o. In general, the training was positively evaluated by all participants, especially appreciated was the access and quality of the lecturer, the preparation, the aid, the organization (time) and the understandable way of submission.
Personally, I appreciate the approximation of the standard through a discussion of specific cases in the OEE, but also of other cases from practice. Most participants have received many practical information, including beyond the trained standard.

Jiri Stejskal
R & D - Products Design
OEZ s.r.o., Letohrad

The feedback from all participants of the IPC 610 training that took place last week was amazing. I have to say that I have not yet come to see people and thank me for such excellent training. They are interested in your approach and training. They also very positively evaluated the practical part where you spent the time with the participants and you were able to discuss with them the possible examples of our production.

It was also a great benefit to me. Despite the fact that I could not spend all of my 3-day training with you, I was inspired by your training and already brought fruit. Once again, thank you and I believe that the next training will be just as good.

Helena Šimčíková
Training Specialist
Integrated Micro-Electronics, Třemošná

I would also like to thank you for organizing the training IPC-A-610-E, which took place at TESLE Liptovsky Hradok 22-24.5.2013. It took place on a professional level, in an informal atmosphere, with the satisfaction of our colleagues from our partner company who attended the training. Supervisor, p. Jiří Dostál, who has accessed us on the way to approach the practical application of the standard in our production. I also have to appreciate the practical information from the manufacturing practice that has either confirmed the correctness of our production processes or brought a new look that can improve them when properly applied. I am convinced that the training organization was clearly a good investment for us that will bring us an improvement in the quality of our production in the future.

Ing. Antonín Rošťák
Tech.department manager
TESLA Liptovský Hrádok a.s., Liptovský Hrádok

Hello, I want to thank once again for the training you have done. I have only positive grades from colleagues. It was not just about a sophisticated standard training, but about what you were doing, complemented by examples from practice, including the imported PCBs, which I greatly appreciate. I personally liked the approach and the concept of the whole course, overall I have a great feeling and thanks for the time spent.

Ing. Petr Kuřina
Production Manager
TTC TELEKOMUNIKACE, s.r.o., Prague 5 - Košíře

We have been cooperating with Realtime Technologies for a long time, and this year's workshop focused on ESD. The workshop was perfectly executed - focused on both the theoretical part and the practical one directly related to our specific function. The practical part has actively taught us not only to identify the potential risks associated with ESD, but also to effectively eliminate them and prevent them from happening in the future. The theoretical part was focused more or less practically on the area of ​​standards, equipment verification, training, etc. The whole workshop together with the audit was a benefit for us. We evaluate the cooperation with Realtime Technologies very positively and we can only recommend it.

Radim Mikulec
Design Engineer
Bang & Olufsen, s.r.o.

The entire training 7711/21 was perfectly prepared and its level was very professional and very entertaining. Let me highlight both the presentation, the knowledge and the practical qualities p. Jiří Dostál, who managed to create a perfect atmosphere both in our conference room and at the practical training site. I find it necessary to mention that the training was attended by different staff from different departments and different levels of knowledge in soldering and soldering technology. Despite the fact that some of the participants had virtually no technological knowledge, they were able to absorb the necessary information according to the interpreter's interpretation. The training participants have excellent motivation to work and quickly and efficiently absorb new knowledge and solving techniques. Thanks again for providing such training, and I believe this was not the latest collaboration between our companies.

Ondřej Brůžek
SMT Engineer
AVIRE, s.r.o., České Budejovice

Our partners

Our partners include international companies that are the market leader. Thanks to it, we can ensure quality, efficiency, ease of work and time saving, as well as high level of expertise.

Realtime Technologies SK, s.r.o.

Ambrova 8, 83101 Bratislava

ID: 452 95 786
VAT: SK202 292 8413

Phone: +421 2 2120 1800
Email info@realtimetec.sk

About us

More than 10 years of training experience, problem solving in electronic assembly and PCB painting.

© 2018 REALTIME TECHNOLOGIES, s.r.o., webdesign Digital One